相关GAN及其SRGAN消融试验
· 22 min read
本文将从三部分，即GAN模型的理论部分，代码（实践）部分及SRGAN的消融试验部分展开介绍
1. GAN（Generative Adversarial Network）生成对抗网络
核心：由两个神经网络——生成器（Generator）和判别器（Discriminator）组成，通过博弈过程相互提升。 · 生成器：试图“伪造”以假乱真的数据。 · 判别器：判断输入是真实数据还是生成器伪造的。 · 训练目标：生成器希望骗过判别器，判别器希望准确识别真假。 本质上是一个最大最小问题：
2. cGAN（Conditional GAN）条件生成对抗网络
核心：在GAN的基础上，引入“条件”信息（如标签、图像、文本等） · 生成器和判别器都接收条件变量 · G（z，y）：在条件 y 下生成图像 · D（x，y）：判断图像是否为在条件 y 下真实的 用途：图像翻译（如黑白图像上色）、语义图生成图像、文本生成图像 目标函数：
3. SRGAN
目的：图像超分辨率，即将低分辨率图像（LR）还原成高分辨率图像（HR） · 生成器结构：使用残差网络（ResNet）进行细节重建。 · 判别器：区分生成的高分图像和真实高分图像。 损失函数包含： · 内容损失（如 MSE 或感知损失）； · 对抗损失（判别器输出） · 感知损失（Perceptual Loss）：在 VGG 网络的高层 feature 上计算差异，更贴近人类视觉感受
4. ESRGAN
基于SRGAN，具有如下优势：
- Residual-in-Residual Dense Block (RRDB)：替换原 SRGAN 的残差块，结构更深，信息流更丰富。
- 对抗损失改进：采用 Relativistic average GAN（RaGAN），即判断“生成图是否比真实图更假”，而不是简单判断真假。
- 感知损失优化：使用未归一化的 VGG 特征图，避免图像过光滑。
- 训练技巧：使用多阶段训练，包括先训练内容损失，再加入对抗训练
总结（理论部分）
| 名称 | 全称 | 类型 | 特点概述 |
|---|---|---|---|
| GAN | Generative Adversarial Net | 无监督生成 | 对抗生成图像 |
| cGAN | Conditional GAN | 条件生成 | 加入标签或条件进行控制 |
| SRGAN | Super-Resolution GAN | 图像超分辨率 | 使用感知损失，生成自然高分图像 |
| ESRGAN | Enhanced SRGAN | 图像超分辨率 | 加强网络结构和损失函数，细节更佳 |
在后文的试验中，原始代码与数据集皆存放在GitHub仓库：https://github.com/zqqqqqqj1110/GAN_WB
GAN对抗神经网络及其变种（试验部分）
1. cGAN
本文以cGAN作为baseline，后续的gan变种模型皆由该部分代码变换而来，因此在这部分会讲的较为全面一些，后文可能会省略
1.1 安装需要的包与环境
import numpy as np
import pandas as pd
import torch
import torch.nn as nn
import torch.nn.functional as F
import torch.optim as optim
from torch.utils.data import Dataset, DataLoader
from skimage.metrics import peak_signal_noise_ratio, structural_similarity
import matplotlib.pyplot as plt
from pytorch_msssim import ms_ssim
device = torch.device("mps" if torch.backends.mps.is_available() else "cpu")
print(device)
作者使用的是MacOS，因此使用了mps，如果是cuda的话直接换成“cuda”即可，配置环境部分（gpu环境）可转到我的个人博客处查阅（或者在这更，懒了，小鸽一下^_^）
1.2 数据预处理
首先需要加载原始的数据集，接着在低分辨率下生成数据（下采样）与保存（通过双线性插值的方法），最后计算mean，std等标准指标（都是后面需要用到的，为了计算指标，不如手动自己计算一下）
# === 1. 加载原始 HR 数据 ===
hr_train = np.load("seasonal_split/HR_data_train_tm_Summer.npy")[:200]
hr_valid = np.load("seasonal_split/HR_data_valid_tm_Summer.npy")[:200]
hr_test = np.load("seasonal_split/HR_data_test_tm_Summer.npy")[:200]
# === 2. 生成 LR 数据（双线性插值至 16×16） ===
def downsample(hr_array, scale=4):
tensor = torch.tensor(hr_array, dtype=torch.float32)
return F.interpolate(tensor, scale_factor=1/scale, mode="bilinear", align_corners=False).numpy()
lr_train = downsample(hr_train)
lr_valid = downsample(hr_valid)
lr_test = downsample(hr_test)
# === 3. 保存为 .npy 文件 ===
np.save("tm/HR_data_train_40.npy", hr_train)
np.save("tm/LR_data_train_40.npy", lr_train)
np.save("tm/HR_data_valid_40.npy", hr_valid)
np.save("tm/LR_data_valid_40.npy", lr_valid)
np.save("tm/HR_data_test_40.npy", hr_test)
np.save("tm/LR_data_test_40.npy", lr_test)
# === 4. mean和std===
mean = np.mean(hr_train, axis=(0, 2, 3))[:, None, None]
std = np.std(hr_train, axis=(0, 2, 3))[:, None, None]
np.save("tm/mean_40.npy", mean)
np.save("tm/std_40.npy", std)
# 每个通道的 min 和 max（例如 2 个通道）
hr_min = hr_train.min(axis=(0, 2, 3)) # shape: (2,)
hr_max = hr_train.max(axis=(0, 2, 3))
# 保存为 .npy 文件，后续评估使用
np.save("tm/min_40.npy", hr_min.astype(np.float32))
np.save("tm/max_40.npy", hr_max.astype(np.float32))
print("完成：生成 LR/HR 切片、保存归一化参数，包括 test")
1.3 自定义数据集类
为了后续方便训练，自定义数据集类，主要是为了变形等操作。最终目的是对每张图进行归一化（标准化）并用于 DataLoader 加载训练/验证数据
class WeatherDataset(Dataset):
def __init__(self, lr_path, hr_path, mean_path, std_path):
self.lr = np.load(lr_path)
self.hr = np.load(hr_path)
self.mean = np.load(mean_path).reshape(2, 1, 1)
self.std = np.load(std_path).reshape(2, 1, 1)
def __len__(self):
return len(self.lr)
def __getitem__(self, idx):
lr = (self.lr[idx] - self.mean) / self.std
hr = (self.hr[idx] - self.mean) / self.std
return torch.tensor(lr, dtype=torch.float32), torch.tensor(hr, dtype=torch.float32)
1.4 定义生成器
定义cGAN等生成器部分，编码器通过两层卷积和 LeakyReLU 将输入图像从 16×16 压缩至 4×4，用于提取深层特征；解码器则通过四层反卷积（ConvTranspose）逐步上采样回 64×64，同时使用 BatchNorm 和 ReLU 激活保持稳定性和非线性表达能力。最终一层使用 Tanh 激活输出高分辨率图像
class GeneratorUNet(nn.Module):
def __init__(self, in_channels=2, out_channels=2, features=64):
super().__init__()
self.encoder = nn.Sequential(
nn.Conv2d(in_channels, features, 4, 2, 1), # 16×16 → 8×8
nn.LeakyReLU(0.2),
nn.Conv2d(features, features * 2, 4, 2, 1), # 8×8 → 4×4
nn.BatchNorm2d(features * 2),
nn.LeakyReLU(0.2),
)
self.decoder = nn.Sequential(
nn.ConvTranspose2d(features * 2, features, 4, 2, 1), # 4×4 → 8×8
nn.BatchNorm2d(features),
nn.ReLU(),
nn.ConvTranspose2d(features, features, 4, 2, 1), # 8×8 → 16×16
nn.BatchNorm2d(features),
nn.ReLU(),
nn.ConvTranspose2d(features, features, 4, 2, 1), # 16×16 → 32×32
nn.BatchNorm2d(features),
nn.ReLU(),
nn.ConvTranspose2d(features, out_channels, 4, 2, 1), # 32×32 → 64×64
nn.Tanh()
)
def forward(self, x):
return self.decoder(self.encoder(x))
1.5 定义判别器
使用多个卷积层对输入图像局部区域进行真实性判别，输入为上采样后的 LR 图像与真实/生成 HR 图像的拼接结果。网络逐层下采样并输出一个 7×7 的判别图，对图像中各个局部 patch 给出是否真实的预测评分
import torch.nn as nn
class Discriminator(nn.Module):
def __init__(self, in_channels=4, features=64):
super().__init__()
self.model = nn.Sequential(
nn.Conv2d(in_channels, features, 4, 2, 1), # (B, 64, 32, 32)
nn.LeakyReLU(0.2),
nn.Conv2d(features, features * 2, 4, 2, 1), # (B, 128, 16, 16)
nn.BatchNorm2d(features * 2),
nn.LeakyReLU(0.2),
nn.Conv2d(features * 2, features * 4, 4, 2, 1), # (B, 256, 8, 8)
nn.BatchNorm2d(features * 4),
nn.LeakyReLU(0.2),
nn.Conv2d(features * 4, 1, 4, 1, 1), # (B, 1, 7, 7) => PatchGAN 输出
nn.Sigmoid()
)
def forward(self, lr_up, hr_or_fake):
# Ensure both inputs are [B, 2, 64, 64]
if lr_up.shape[-2:] != hr_or_fake.shape[-2:]:
raise ValueError(f"Shape mismatch: lr_up={lr_up.shape}, hr={hr_or_fake.shape}")
x = torch.cat([lr_up, hr_or_fake], dim=1) # => [B, 4, H, W]
return self.model(x)
1.6 计算指标
本文以SSIM，PSNR为例，对模型进行评估，需要注意的是归一化不应该是z-score，而是应该使用max-min归一化（吃过一次亏）
from skimage.metrics import peak_signal_noise_ratio, structural_similarity
import torch.nn.functional as F
def compute_psnr_ssim(pred, target):
# 转换为 numpy 格式，shape: (N, H, W, C)
pred = pred.detach().cpu().numpy().transpose(0, 2, 3, 1)
target = target.detach().cpu().numpy().transpose(0, 2, 3, 1)
data_range = max(target.max(), pred.max()) - min(target.min(), pred.min())
psnr_total, ssim_total = 0, 0
for p, t in zip(pred, target):
psnr_total += peak_signal_noise_ratio(t, p, data_range=data_range)
ssim_total += structural_similarity(t, p, channel_axis=-1, data_range=data_range)
return psnr_total / len(pred), ssim_total / len(pred)
def compute_rmse(pred, target):
return torch.sqrt(torch.mean((pred - target) ** 2))
def compute_mae(pred, target):
return torch.mean(torch.abs(pred - target))
# === 添加 SSIM Loss ===
def ssim_loss(pred, target, C1=0.01**2, C2=0.03**2):
mu_x = F.avg_pool2d(pred, 3, 1, 1)
mu_y = F.avg_pool2d(target, 3, 1, 1)
sigma_x = F.avg_pool2d(pred ** 2, 3, 1, 1) - mu_x ** 2
sigma_y = F.avg_pool2d(target ** 2, 3, 1, 1) - mu_y ** 2
sigma_xy = F.avg_pool2d(pred * target, 3, 1, 1) - mu_x * mu_y
ssim_n = (2 * mu_x * mu_y + C1) * (2 * sigma_xy + C2)
ssim_d = (mu_x ** 2 + mu_y ** 2 + C1) * (sigma_x + sigma_y + C2)
ssim_map = ssim_n / (ssim_d + 1e-8)
return 1 - ssim_map.mean()
# 加载 min/max
hr_min = np.load("tm/min_40.npy")[:, None, None]
hr_max = np.load("tm/max_40.npy")[:, None, None]
def minmax_scale(tensor):
# 缩放到 0~1
return (tensor - torch.tensor(hr_min, dtype=torch.float32).to(tensor.device)) / \
(torch.tensor(hr_max - hr_min, dtype=torch.float32).to(tensor.device))
1.7 加载数据集，准备训练
batch size为将n个样本为一组（一个批次）读取数据.将之前的训练集，测试集与评估集上传到数据类并加载，准备训练。需要注意的是batch size越大，对gpu的负担也越大，但是同时训练到的数据也越多
train_set = WeatherDataset(
"tm/LR_data_train_40.npy", "tm/HR_data_train_40.npy",
"tm/mean_40.npy", "tm/std_40.npy"
)
val_set = WeatherDataset(
"tm/LR_data_valid_40.npy", "tm/HR_data_valid_40.npy",
"tm/mean_40.npy", "tm/std_40.npy"
)
test_set = WeatherDataset(
"tm/LR_data_test_40.npy", "tm/HR_data_test_40.npy",
"tm/mean_40.npy", "tm/std_40.npy"
)
test_loader = DataLoader(test_set, batch_size=32, shuffle=False)
train_loader = DataLoader(train_set, batch_size=32, shuffle=True)
val_loader = DataLoader(val_set, batch_size=32, shuffle=False)
1.8 模型训练
首先先对模型进行初始化，最后一句print为形状，如果形状不对后续训练必失败。实例化生成器和判别器并送到设备（MPS 或 CPU）；接着定义损失函数，MSELoss 用于像素级内容损失，BCELoss 用于 GAN 判别器对抗损失；最后定义优化器，使用ADAM进行优化并将学习率调为1e-4
# === 6. Model Initialization ===
G = GeneratorUNet().to(device)
D = Discriminator().to(device)
criterion_GAN = nn.BCEWithLogitsLoss()
criterion_L1 = nn.L1Loss()
opt_G = torch.optim.Adam(G.parameters(), lr=1e-4, betas=(0.5, 0.999), weight_decay=1e-4)
opt_D = torch.optim.Adam(D.parameters(), lr=1e-4, betas=(0.5, 0.999), weight_decay=1e-4)
with torch.no_grad():
dummy_input = torch.randn(1, 2, 16, 16).to(device)
dummy_output = G(dummy_input)
print(f"G output shape: {dummy_output.shape}") # 应该是 [1, 2, 64, 64]
准备好了之后，最后开始进行模型的训练与保存，训练时可以将每一轮epoch的指标都保存在数组中，方便后续画图；还需要注意在训练前准备标签构造，为对抗训练准备真假标签（用于 BCELoss）且判别器输出是 6×6 patch 的预测，匹配标签形状。
num_epochs = 200
train_psnrs, train_ssims, train_rmses, train_maes = [], [], [], []
val_psnrs, val_ssims, val_rmses, val_maes = [], [], [], []
for epoch in range(num_epochs):
G.train()
for lr, hr in train_loader:
lr, hr = lr.to(device), hr.to(device)
# === Forward Generator ===
fake = G(lr).to(device)
lr_up = F.interpolate(lr, size=hr.shape[-2:], mode="bilinear", align_corners=False)
# === Train Discriminator ===
D_real = D(lr_up, hr).to(device)
D_fake = D(lr_up, fake.detach()).to(device)
loss_D = (
criterion_GAN(D_real, torch.ones_like(D_real)) +
criterion_GAN(D_fake, torch.zeros_like(D_fake))
) * 0.5
opt_D.zero_grad()
loss_D.backward()
opt_D.step()
# === Train Generator ===
pred = D(lr_up, fake)
loss_ssim = ssim_loss(fake, hr)
loss_l1 = criterion_L1(fake, hr)
loss_gan = criterion_GAN(pred, torch.ones_like(pred))
loss_G = 0.01 * loss_gan + 1.0 * loss_ssim + 1.0 * loss_l1
opt_G.zero_grad()
loss_G.backward()
opt_G.step()
train_pred = G(lr)
train_pred = F.interpolate(train_pred, size=hr.shape[-2:], mode="bilinear", align_corners=False).to(device)
# 评估
train_pred_mm = minmax_scale(train_pred)
hr_mm = minmax_scale(hr)
psnr_train, ssim_train = compute_psnr_ssim(train_pred, hr)
rmse_train = compute_rmse(train_pred_mm, hr_mm)
mae_train = compute_mae(train_pred_mm, hr_mm)
# 添加保存
train_psnrs.append(psnr_train)
train_ssims.append(ssim_train)
train_rmses.append(rmse_train)
train_maes.append(mae_train)
G.eval()
with torch.no_grad():
val_lr, val_hr = next(iter(val_loader))
val_lr, val_hr = val_lr.to(device), val_hr.to(device)
pred_hr = G(val_lr)
pred_hr = F.interpolate(pred_hr, size=val_hr.shape[-2:], mode="bilinear", align_corners=False).to(device)
# 计算指标
pred_val_mm = minmax_scale(pred_hr)
val_hr_mm = minmax_scale(val_hr)
psnr_val, ssim_val = compute_psnr_ssim(pred_hr, val_hr)
rmse_val = compute_rmse(pred_val_mm, val_hr_mm)
mae_val = compute_mae(pred_val_mm, val_hr_mm)
# 添加保存
val_psnrs.append(psnr_val)
val_ssims.append(ssim_val)
val_rmses.append(rmse_val)
val_maes.append(mae_val)
# === Print summary ===
print(f"Epoch {epoch+1}: "
f"Train PSNR={psnr_train:.2f}, SSIM={ssim_train:.4f}, RMSE={rmse_train:.4f}, MAE={mae_train:.4f} | "
f"Valid PSNR={psnr_val:.2f}, SSIM={ssim_val:.4f}, RMSE={rmse_val:.4f}, MAE={mae_val:.4f}")
1.9 模型验证
训练完了之后对保存好了的模型进行test验证，查看评估指标的表现
import matplotlib.pyplot as plt
from torch.utils.data import DataLoader
# === 1. 加载测试集 ===
test_set = WeatherDataset(
"tm/LR_data_test_40.npy", "tm/HR_data_test_40.npy",
"tm/mean_40.npy", "tm/std_40.npy"
)
test_loader = DataLoader(test_set, batch_size=8, shuffle=False)
# === 2. 在测试集上评估模型 ===
G.eval()
test_psnrs, test_ssims, test_rmses, test_maes = [], [], [], []
images_to_show = [] # 原图、真实图、预测图（反归一化后）
# 反归一化函数
mean = np.load("tm/mean_40.npy")
std = np.load("tm/std_40.npy")
def denormalize(tensor):
return tensor * torch.tensor(std).to(tensor.device) + torch.tensor(mean).to(tensor.device)
with torch.no_grad():
for test_lr, test_hr in test_loader:
test_lr, test_hr = test_lr.to(device), test_hr.to(device)
pred_test = G(test_lr)
pred_test = F.interpolate(pred_test, size=test_hr.shape[-2:], mode="bilinear", align_corners=False)
# 计算指标（归一化下）
pred_mm = minmax_scale(pred_test)
hr_mm = minmax_scale(test_hr)
psnr, ssim = compute_psnr_ssim(pred_test, test_hr)
rmse = compute_rmse(pred_mm, hr_mm)
mae = compute_mae(pred_mm, hr_mm)
test_psnrs.append(psnr)
test_ssims.append(ssim)
test_rmses.append(rmse.cpu().item())
test_maes.append(mae.cpu().item())
# 可视化：选取前1张图，反归一化
for i in range(1):
lr_img = F.interpolate(test_lr[i:i+1], size=(64, 64), mode="bilinear", align_corners=False)
images_to_show.append((
denormalize(lr_img[0].cpu()),
denormalize(test_hr[i].cpu()),
denormalize(pred_test[i].cpu())
))
# === 3. 打印测试集平均指标 ===
print(f"Test Set Evaluation cGAN Winter:")
print(f"PSNR: {np.mean(test_psnrs):.2f}")
print(f"SSIM: {np.mean(test_ssims):.4f}")
print(f"RMSE: {np.mean(test_rmses):.4f}")
print(f"MAE: {np.mean(test_maes):.4f}")
常用指标计算公式
- PSNR（峰值信噪比）
- SSIM（结构相似性）
- RMSE（均方根误差）
- MAE（平均绝对误差）
1.10 保存
这部分就不多说了，提供一下评估指标的保存方式，接着想可视化等等皆可
# 将数组保存为 .npy 文件
np.save("1_ssim_train.npy", train_ssims)
np.save("1_psnr_train.npy", train_psnrs)
np.save("1_ssim_valid.npy", val_ssims)
np.save("1_psnr_valid.npy", val_psnrs)
print("✅ 已保存为 1_ssim_train.npy, 1_psnr_train.npy, 1_ssim_valid.npy, 1_psnr_valid.npy")
# 确保每个 tensor 都通过 .detach() 断开计算图，之后转移到 CPU 并转换为 NumPy 数组
train_maes_cpu = [mae.detach().cpu().numpy() for mae in train_maes]
train_rmses_cpu = [rmse.detach().cpu().numpy() for rmse in train_rmses]
valid_maes_cpu = [mae.detach().cpu().numpy() for mae in val_maes]
valid_rmses_cpu = [rmse.detach().cpu().numpy() for rmse in val_rmses]
# 保存为 .npy 文件
np.save("1_mae_train.npy", train_maes_cpu)
np.save("1_rmes_train.npy", train_rmses_cpu)
np.save("1_mae_valid.npy", valid_maes_cpu)
np.save("1_rmes_valid.npy", valid_rmses_cpu)
# .npy 文件的列表
files = [
"1_mae_train.npy", "1_mae_valid.npy",
"1_psnr_train.npy", "1_psnr_valid.npy",
"1_rmes_train.npy", "1_rmes_valid.npy",
"1_ssim_train.npy", "1_ssim_valid.npy"
]
# 创建一个字典来存储数据
data_dict = {}
# 加载每个 .npy 文件并存入字典
for file in files:
data_dict[file] = np.load(file)
# 将字典转换为 pandas DataFrame
df = pd.DataFrame(data_dict)
# 将 DataFrame 保存为 CSV 文件
df.to_csv("cGAN_data_Winter.csv", index=False)
2. SRGAN
大部分可类比过来，具体就去看原代码，这里就讲一些不一样的部分，比如说生成器与判别器
2.1 生成器模型 SRResNetGenerator
该网络基本结构模仿 SRResNet，内含： · Initial Layer：9x9 大卷积核 + PReLU · 8 个残差块（每块带有两层卷积 + BN + PReLU） · 残差连接（ResNet 风格） 上采样层： · 使用 PixelShuffle 实现图像 上采样（从 16x16 → 64x64） · 最终卷积 + Tanh：输出范围规范为 [-1, 1]
class SRResNetGenerator(nn.Module):
def __init__(self, in_channels=2, out_channels=2, features=64):
super().__init__()
self.initial = nn.Sequential(
nn.Conv2d(in_channels, features, kernel_size=9, padding=4),
nn.PReLU()
)
# 8 Residual Blocks
res_blocks = []
for _ in range(8):
res_blocks.append(nn.Sequential(
nn.Conv2d(features, features, kernel_size=3, padding=1),
nn.BatchNorm2d(features),
nn.PReLU(),
nn.Conv2d(features, features, kernel_size=3, padding=1),
nn.BatchNorm2d(features)
))
self.res_blocks = nn.Sequential(*res_blocks)
self.mid_conv = nn.Sequential(
nn.Conv2d(features, features, kernel_size=3, padding=1),
nn.BatchNorm2d(features)
)
self.upsample = nn.Sequential(
nn.Conv2d(features, features * 4, 3, 1, 1),
nn.PixelShuffle(2),
nn.PReLU(),
nn.Conv2d(features, features * 4, 3, 1, 1),
nn.PixelShuffle(2),
nn.PReLU(),
)
self.final = nn.Sequential(
nn.Conv2d(features, out_channels, kernel_size=9, padding=4),
nn.Tanh()
)
def forward(self, x):
x1 = self.initial(x)
res = x1
for block in self.res_blocks:
res = res + block(res)
out = self.mid_conv(res)
out = out + x1
out = self.upsample(out)
return self.final(out)
2.2 定义判别器 Discriminator
该判别器用于判断输入图像是否为真实高分图像，具体如下： · 多层卷积+BN+LeakyReLU，最后输出为一个值 · 类似 PatchGAN 风格（结果为二维特征图） · 最后一层采用 Sigmoid 激活，输出概率
import torch.nn as nn
class Discriminator(nn.Module):
def __init__(self, in_channels=4, features=64):
super().__init__()
self.model = nn.Sequential(
nn.Conv2d(in_channels, features, 4, 2, 1), # (B, 64, 32, 32)
nn.LeakyReLU(0.2),
nn.Conv2d(features, features * 2, 4, 2, 1), # (B, 128, 16, 16)
nn.BatchNorm2d(features * 2),
nn.LeakyReLU(0.2),
nn.Conv2d(features * 2, features * 4, 4, 2, 1), # (B, 256, 8, 8)
nn.BatchNorm2d(features * 4),
nn.LeakyReLU(0.2),
nn.Conv2d(features * 4, 1, 4, 1, 1), # (B, 1, 7, 7) => PatchGAN 输出
nn.Sigmoid()
)
def forward(self, lr_up, hr_or_fake):
# 确保为[B, 2, 64, 64]
if lr_up.shape[-2:] != hr_or_fake.shape[-2:]:
raise ValueError(f"Shape mismatch: lr_up={lr_up.shape}, hr={hr_or_fake.shape}")
x = torch.cat([lr_up, hr_or_fake], dim=1) # [B, 4, H, W]
return self.model(x)
3. ESRGAN
3.1 生成器模型RDBNet
使用多个 残差密集块（RRDB），用于深层次特征提取与稳定训练；每个 RRDB 由三个去 BN 的 DenseBlock 组成，通过局部和全局残差连接增强梯度传播、抑制信息丢失。整体流程为：输入图像经卷积提取初步特征 → 多层 RRDB 提取深层表示 → 上采样模块逐步恢复空间分辨率 → 最终输出
import torch
import torch.nn as nn
# Dense Block（去掉BN + 残差缩放）
class DenseBlock(nn.Module):
def __init__(self, channels=64, growth_channels=32):
super().__init__()
self.layers = nn.ModuleList()
for i in range(5):
self.layers.append(nn.Conv2d(channels + i * growth_channels, growth_channels, 3, 1, 1))
self.lrelu = nn.LeakyReLU(0.2, inplace=True)
self.conv_last = nn.Conv2d(channels + 5 * growth_channels, channels, 3, 1, 1)
def forward(self, x):
inputs = [x]
for conv in self.layers:
out = self.lrelu(conv(torch.cat(inputs, dim=1)))
inputs.append(out)
out = self.conv_last(torch.cat(inputs, dim=1))
return x + out * 0.2 # Local residual
# RRDB
class RRDB(nn.Module):
def __init__(self, channels, growth_channels=32):
super().__init__()
self.block1 = DenseBlock(channels, growth_channels)
self.block2 = DenseBlock(channels, growth_channels)
self.block3 = DenseBlock(channels, growth_channels)
def forward(self, x):
out = self.block1(x)
out = self.block2(out)
out = self.block3(out)
return x + out * 0.2 # Global residual
# ESRGAN Generator (RRDBNet)
class RRDBNet(nn.Module):
def __init__(self, in_channels=2, out_channels=2, features=64, num_blocks=8):
super().__init__()
self.conv_first = nn.Conv2d(in_channels, features, 3, 1, 1)
# RRDB trunk
self.rrdb_blocks = nn.Sequential(*[RRDB(features) for _ in range(num_blocks)])
self.trunk_conv = nn.Conv2d(features, features, 3, 1, 1)
# Upsampling blocks
self.upsample = nn.Sequential(
nn.Conv2d(features, features * 4, 3, 1, 1),
nn.PixelShuffle(2),
nn.LeakyReLU(0.2, inplace=True),
nn.Conv2d(features, features * 4, 3, 1, 1),
nn.PixelShuffle(2),
nn.LeakyReLU(0.2, inplace=True)
)
self.conv_last = nn.Conv2d(features, out_channels, 3, 1, 1)
def forward(self, x):
fea = self.conv_first(x)
trunk = self.trunk_conv(self.rrdb_blocks(fea))
fea = fea + trunk
out = self.upsample(fea)
out = self.conv_last(out)
return out
3.2 判 别器模型ESRDiscriminator
ESRDiscriminator 是一个深层 PatchGAN 判别器，通过逐层卷积下采样提取图像局部特征，并对 LR 图像与 HR 图像的拼接输入进行真假判别
class ESRDiscriminator(nn.Module):
def __init__(self, in_channels=4, base_features=64):
super().__init__()
def block(in_f, out_f, stride):
return nn.Sequential(
nn.Conv2d(in_f, out_f, 3, stride, 1),
nn.LeakyReLU(0.2, inplace=True)
)
layers = [
block(in_channels, base_features, 1),
block(base_features, base_features, 2),
block(base_features, base_features * 2, 1),
block(base_features * 2, base_features * 2, 2),
block(base_features * 2, base_features * 4, 1),
block(base_features * 4, base_features * 4, 2),
block(base_features * 4, base_features * 8, 1),
block(base_features * 8, base_features * 8, 2),
nn.Conv2d(base_features * 8, 1, 3, 1, 1) # PatchGAN 输出
]
self.model = nn.Sequential(*layers)
def forward(self, lr_up, hr_or_fake):
if lr_up.shape[-2:] != hr_or_fake.shape[-2:]:
raise ValueError(f"Shape mismatch: lr_up={lr_up.shape}, hr={hr_or_fake.shape}")
x = torch.cat([lr_up, hr_or_fake], dim=1) # 拼接输入 [B, 4, H, W]
return self.model(x)
SRGAN及其消融试验
以SRGAN为baseline，本文对比了四种情况，即
1. 损失函数改进版
除了使用传统的 MSE 和对抗损失，还使用了VGG perceptual loss（基于 VGG 网络的中间层）；MS-SSIM（多尺度结构相似性指标）
2. 通道注意力机制版
在生成器的残差块或特征融合模块中引入 Channel Attention 模块，同时引入 Squeeze-and-Excitation（SE）通道注意力模块，并在每个残差块之后插入 SEBlock(features)
class SEBlock(nn.Module):
def __init__(self, channel, reduction=16):
super(SEBlock, self).__init__()
self.avg_pool = nn.AdaptiveAvgPool2d(1)
self.fc1 = nn.Conv2d(channel, channel // reduction, 1, bias=False)
self.relu = nn.ReLU(inplace=True)
self.fc2 = nn.Conv2d(channel // reduction, channel, 1, bias=False)
self.sigmoid = nn.Sigmoid()
def forward(self, x):
# Squeeze: Global Average Pooling
y = self.avg_pool(x)
# Excitation: Fully connected layers
y = self.fc1(y)
y = self.relu(y)
y = self.fc2(y)
y = self.sigmoid(y)
return x * y
class SRResNetGenerator(nn.Module):
def __init__(self, in_channels=2, out_channels=2, features=64):
super(SRResNetGenerator, self).__init__()
self.initial = nn.Sequential(
nn.Conv2d(in_channels, features, kernel_size=9, padding=4),
nn.PReLU()
)
# 8 Residual Blocks with SE Blocks
res_blocks = []
for _ in range(8):
res_blocks.append(nn.Sequential(
nn.Conv2d(features, features, kernel_size=3, padding=1),
nn.BatchNorm2d(features),
nn.PReLU(),
nn.Conv2d(features, features, kernel_size=3, padding=1),
nn.BatchNorm2d(features),
SEBlock(features) # Add SE Block after each residual block
))
self.res_blocks = nn.Sequential(*res_blocks)
self.mid_conv = nn.Sequential(
nn.Conv2d(features, features, kernel_size=3, padding=1),
nn.BatchNorm2d(features)
)
self.upsample = nn.Sequential(
nn.Conv2d(features, features * 4, 3, 1, 1),
nn.PixelShuffle(2),
nn.PReLU(),
nn.Conv2d(features, features * 4, 3, 1, 1),
nn.PixelShuffle(2),
nn.PReLU(),
)
self.final = nn.Sequential(
nn.Conv2d(features, out_channels, kernel_size=9, padding=4),
nn.Tanh()
)
def forward(self, x):
x1 = self.initial(x)
res = x1
for block in self.res_blocks:
res = res + block(res)
out = self.mid_conv(res)
out = out + x1
out = self.upsample(out)
return self.final(out)
3. 多尺度特征融合版
网络结构中引入多尺度特征处理模块（如使用 3x3、5x5、7x7 不同卷积核或金字塔结构），并将不同尺度特征拼接或加权融合，最后添加至 SRResNetGenerator 内部结构中
class MultiScaleFeatureFusion(nn.Module):
def __init__(self, in_channels, features):
super(MultiScaleFeatureFusion, self).__init__()
# 使用膨胀卷积增加感 受野
self.scale1 = nn.Conv2d(in_channels, features, kernel_size=3, padding=1, dilation=1)
self.scale2 = nn.Conv2d(in_channels, features, kernel_size=5, padding=2, dilation=1)
self.scale3 = nn.Conv2d(in_channels, features, kernel_size=7, padding=3, dilation=1)
self.fusion = nn.Conv2d(features * 3, features, kernel_size=1)
def forward(self, x):
x1 = self.scale1(x)
x2 = self.scale2(x)
x3 = self.scale3(x)
fused = torch.cat([x1, x2, x3], dim=1)
return self.fusion(fused)
class SRResNetGenerator(nn.Module):
def __init__(self, in_channels=2, out_channels=2, features=64):
super(SRResNetGenerator, self).__init__()
self.initial = nn.Sequential(
nn.Conv2d(in_channels, features, kernel_size=9, padding=4),
nn.PReLU()
)
# Multi-scale feature fusion module
self.multi_scale_fusion = MultiScaleFeatureFusion(in_channels=features, features=features)
# 修改残差块，使用膨胀卷积
res_blocks = []
for _ in range(8): # 保持16个残差块
res_blocks.append(nn.Sequential(
nn.Conv2d(features, features, kernel_size=3, padding=2, dilation=2), # 使用膨胀卷积
nn.BatchNorm2d(features),
nn.PReLU(),
nn.Conv2d(features, features, kernel_size=3, padding=2, dilation=2), # 使用膨胀卷积
nn.BatchNorm2d(features)
))
self.res_blocks = nn.Sequential(*res_blocks)
self.mid_conv = nn.Sequential(
nn.Conv2d(features, features, kernel_size=3, padding=1),
nn.BatchNorm2d(features)
)
self.upsample = nn.Sequential(
nn.Conv2d(features, features * 4, 3, 1, 1),
nn.PixelShuffle(2),
nn.PReLU(),
nn.Conv2d(features, features * 4, 3, 1, 1),
nn.PixelShuffle(2),
nn.PReLU(),
)
self.final = nn.Sequential(
nn.Conv2d(features, out_channels, kernel_size=9, padding=4),
nn.Tanh()
)
def forward(self, x):
x1 = self.initial(x)
# Multi-scale feature fusion
x2 = self.multi_scale_fusion(x1)
res = x1 + x2 # Combine initial and multi-scale fused features
for block in self.res_blocks:
res = res + block(res) # Residual learning
out = self.mid_conv(res)
out = out + x1 # Add skip connection from initial input
out = self.upsample(out)
return self.final(out)
4. 融合
同时采用： · 感知 + MS-SSIM + MSE + GAN 损失； · 多尺度结构； · 通道注意力；
5. 总结
| 实验名称 | 改进点类型 | 主要操作 | 作用 |
|---|---|---|---|
| 1. 损失函数改进 | 损失函数层面 | 引入 多种损失组合，如感知损失（VGG）、MS-SSIM 等 | 更符合人类视觉感知，提升图像质量 |
| 2. 通道注意力机制 | 网络结构层面 | 在生成器中加入 通道注意力模块（如 SE/CA） | 自适应关注重要特征通道，提升表示能力 |
| 3. 多尺度特征融合 | 网络结构层面 | 引入多个尺度（不同尺寸卷积核或下采样路径）进行特征融合 | 更好保留图像纹理和细节 |
| 4. 融合模型 | 综合增强 | 同时引入注意力 + 多尺度 + 改进损失 | 协同提升性能，验证组合优势 |